Microsoft Docs - Latest Articles

Azure.Storage Module

https://docs.microsoft.com/fr-fr/powershell/module/azure.storage/ Azure.Storage Dans cet article Storage Azure.Storage.Disable-AzureStorageDeleteRetentionPolicy Azure.Storage.Enable-AzureStorageDeleteRetentionPolicy Azure.Storage.Get-AzureStorageBlob Azure.Storage.Get-AzureStorageBlobContent Azure.Storage.Get-AzureStorageBlobCopyState Azure.Storage.Get-AzureStorageContainer
Published Date : vendredi 16 novembre 2018

Azure.AnalysisServices Module

https://docs.microsoft.com/fr-fr/powershell/module/azure.analysisservices/ Azure.AnalysisServices Dans cet article Analysis Services Azure.AnalysisServices.Add-AzureAnalysisServicesAccount Azure.AnalysisServices.Export-AzureAnalysisServicesInstanceLog Azure.AnalysisServices.Restart-AzureAnalysisServicesInstance Azure.AnalysisServices.Sync-AzureAnalysisServicesInstance
Published Date : vendredi 16 novembre 2018

Az.Accounts Module

https://docs.microsoft.com/fr-fr/powershell/module/az.accounts/ Manages credentials and common configuration for all Azure modules.
Published Date : lundi 4 janvier 2021

Azs.AzureBridge.Admin Module

https://docs.microsoft.com/fr-fr/powershell/module/azs.azurebridge.admin/
Published Date : dimanche 17 janvier 2021

AzureRM.DeploymentManager Module

https://docs.microsoft.com/fr-fr/powershell/module/azurerm.deploymentmanager/
Published Date : vendredi 28 septembre 2018

Azure.Service Module

https://docs.microsoft.com/fr-fr/powershell/module/servicemanagement/azure.service/ Azure.Service Dans cet article Active Directory Azure.Service.Get-AzureServiceADDomainExtension Azure.Service.New-AzureServiceADDomainExtensionConfig Azure.Service.Remove-AzureServiceADDomainExtension Azure.Service.Set-AzureServiceADDomainExtension Application Gateway Azure.Service.Add-AzureApplicationGatewaySslCertificate
Published Date : mardi 11 septembre 2018

Az.Advisor Module

https://docs.microsoft.com/fr-fr/powershell/module/az.advisor/ Commands to interact with Azure Advisor.
Published Date : lundi 4 janvier 2021

Azs.Storage.Admin Module

https://docs.microsoft.com/fr-fr/powershell/module/-azs.storage.admin/
Published Date : dimanche 17 janvier 2021

Installer et configurer le scanneur d’étiquetage unifiée de l’Azure Information Protection (AIP)

https://docs.microsoft.com/fr-fr/azure/information-protection/deploy-aip-scanner-configure-install Instructions d’installation et de configuration du Azure Information Protection scanneur d’étiquetage unifié pour la détection, la classification et la protection des fichiers sur les banques de données.
Published Date : dimanche 29 novembre 2020

Ligne de base de sécurité Azure pour Azure Information Protection

https://docs.microsoft.com/fr-fr/azure/information-protection/security-baseline Le Azure Information Protection la ligne de base de sécurité fournit des instructions et des ressources pour la mise en œuvre des recommandations de sécurité spécifiées dans le test de sécurité Azure.
Published Date : mercredi 18 novembre 2020

Azure Information Protection (AIP) étiquetage, classification et protection

https://docs.microsoft.com/fr-fr/azure/information-protection/aip-classification-and-protection Découvrez comment Azure Information Protection (AIP) peut étiqueter des documents et des e-mails pour classer et protéger vos données.
Published Date : lundi 14 septembre 2020

Résoudre les problèmes de déploiement d’un analyseur local

https://docs.microsoft.com/fr-fr/azure/information-protection/deploy-aip-scanner-tsg Instructions pour la résolution des problèmes liés au déploiement d’un analyseur local d’étiquetage local
Published Date : dimanche 27 décembre 2020

Connect-AipService (AIPService)

https://docs.microsoft.com/en-us/powershell/module/aipservice/connect-aipservice The Connect-AipService cmdlet connects you to Azure Information Protection so that you can then run administrative commands for the protection service for your tenant. This cmdlet can also be used by a partner company that manages your tenant. You must run this cmdlet before you can run the other cmdlets in this module. To connect to Azure Information Protection, use an account that is one of the following: A global admin for your Office 365 tenant. A global administrator for your Azure AD tenant. However, this account cannot be a Microsoft account (MSA) or from another Azure tenant. A user account from your tenant that has been granted administrative rights to Azure Information Protection by using the Add-AipServiceRoleBasedAdministrator cmdlet. An Azure AD admin role of Azure Information Protection administrator, Compliance administrator, or Compliance data administrator. Tip If you are not prompted for your credentials, and you see an error message such as Cannot use this feature without credentials, verify that Internet Explorer is configured to use Windows integrated authentication. If this setting is not enabled, enable it, restart Internet Explorer, and then retry authentication to the Information Protection service.
Published Date : dimanche 17 janvier 2021

Get-AIPScannerRepository (AzureInformationProtection)

https://docs.microsoft.com/en-us/powershell/module/azureinformationprotection/get-aipscannerrepository Gets a list of data repositories that the content scan job is configured to scan. For more information about content scan jobs, see the Azure Information Protection on-premises scanner documentation. Note If you are using the AIP classic client, this cmdlet is deprecated. Instead, use the Azure portal to configure the scanner. To provide a unified and streamlined customer experience, the Azure Information Protection classic client and Label Management in the Azure Portal are being deprecated as of March 31, 2021. This time-frame allows all current Azure Information Protection customers to transition to our unified labeling solution using the Microsoft Information Protection Unified Labeling platform. Learn more in the official deprecation notice.
Published Date : dimanche 17 janvier 2021

Remove-AIPScannerRepository (AzureInformationProtection)

https://docs.microsoft.com/en-us/powershell/module/azureinformationprotection/remove-aipscannerrepository Deletes any repositories described by the Repositories parameter, or returned by a piped Get-AIPScannerRepository cmdlet. For more information about content scan jobs, see the Azure Information Protection on-premises scanner documentation. Note If you are using the AIP classic client, this cmdlet is deprecated. Instead, use the Azure portal to configure the scanner. To provide a unified and streamlined customer experience, the Azure Information Protection classic client and Label Management in the Azure Portal are being deprecated as of March 31, 2021. This time-frame allows all current Azure Information Protection customers to transition to our unified labeling solution using the Microsoft Information Protection Unified Labeling platform. Learn more in the official deprecation notice.
Published Date : dimanche 17 janvier 2021

Remove-AIPScannerContentScanJob (AzureInformationProtection)

https://docs.microsoft.com/en-us/powershell/module/azureinformationprotection/remove-aipscannercontentscanjob Deletes an entire Azure Information Protection content scan job. Caution Deleting the content scan job means that the configured repositories may not be scanned again, unless they are configured for a different content scan job. For more information about content scan jobs, see the Azure Information Protection on-premises scanner documentation. Important If you are using the AIP classic client, this cmdlet is deprecated. Instead, use the Azure portal to configure the scanner.
Published Date : dimanche 17 janvier 2021

Set-AIPScanner (AzureInformationProtection)

https://docs.microsoft.com/en-us/powershell/module/azureinformationprotection/set-aipscanner The Set-AIPScanner cmdlet updates the service account and SQL Server database instance for the Azure Information Protection scanner. Use this command when you want to change the account or database details that was previously specified, for example, when you installed the scanner by running the Install-AIPScanner cmdlet. The new configuration takes effects when the Azure Information Protection Scanner service is next started. This cmdlet does not automatically restart this service. Note To provide a unified and streamlined customer experience, the Azure Information Protection classic client and Label Management in the Azure Portal are being deprecated as of March 31, 2021. This time-frame allows all current Azure Information Protection customers to transition to our unified labeling solution using the Microsoft Information Protection Unified Labeling platform. Learn more in the official deprecation notice.
Published Date : dimanche 17 janvier 2021

Get-AIPScannerContentScanJob (AzureInformationProtection)

https://docs.microsoft.com/en-us/powershell/module/azureinformationprotection/get-aipscannercontentscanjob Returns a full list of all the parameters configured for the content scan job. For more information about content scan jobs, see the Azure Information Protection on-premises scanner documentation.
Published Date : dimanche 17 janvier 2021

Protect-RMSFile (AzureInformationProtection)

https://docs.microsoft.com/en-us/powershell/module/azureinformationprotection/protect-rmsfile The Protect-RMSFile cmdlet protects a file or all files in a specified folder by using Azure RMS or AD RMS. If the file was previously protected, it will be protected again, to apply any changes such as those that might be made to the template that is being used to protect the file. Multiple file types can be protected in the same way that the Azure Information Protection client can protect files when you use the "Classify and protect" right-click option from File Explorer. Different levels of protection are automatically applied (native or generic), depending on the file type. You can change the level of protection by editing the registry. In addition, some files change their file name extension after they are protected by Rights Management. For more information, see the File types supported for protection section from the Azure Information Protection client admin guide. Before you run this cmdlet, you must run Get-RMSTemplate to download the templates onto your computer. If the template that you want to use has been modified since you ran this cmdlet, run it again with the -force parameter to download the revised template. When you run this cmdlet, you have the following options: The file is protected in the current location, replacing the original file that was unprotected. The original file remains unprotected and a protected version of the file is created in another location. All files in the specified folder are protected in the current location, replacing the original files that were unprotected. All files in the specified folder remains unprotected and a protected version of each file is created in another location. You cannot run this command concurrently but must wait for the original command to complete before running it again. If you try to run it again before the previous command has finished, the new command will fail. This cmdlet writes to the following log files: Success.log, Failure.log, and Debug.log in %localappdata%\Microsoft\MSIPC\pscmdlet\Logs\. Tip For step-by-step instructions to use this cmdlet to protect files on a Windows Server file share, using File Resource Manager and File Classification Infrastructure, see RMS Protection with Windows Server File Classification Infrastructure (FCI). Note To provide a unified and streamlined customer experience, the Azure Information Protection classic client and Label Management in the Azure Portal are being deprecated as of March 31, 2021. This time-frame allows all current Azure Information Protection customers to transition to our unified labeling solution using the Microsoft Information Protection Unified Labeling platform. Learn more in the official deprecation notice.
Published Date : dimanche 17 janvier 2021

Set-AipServiceTemplateProperty (AIPService)

https://docs.microsoft.com/en-us/powershell/module/aipservice/set-aipservicetemplateproperty The Set-AipServiceTemplateProperty cmdlet updates a property or properties of a protection template for Azure Information Protection. You can update most of these properties in the Azure portal. When you use this cmdlet, the template is identified by its GUID, which must refer to an existing protection template. You cannot use this cmdlet to update the default templates. You can use the Get-AipServiceTemplate cmdlet to get the template ID. Important When you update properties of a protection template, the existing settings for those properties will be overwritten (not supplemented) without warning, so be sure to specify all the settings that you need for the properties that you are updating. As a best practice, back up the existing template before you run this cmdlet, by using the Export-AipServiceTemplate cmdlet. Then, if you need to revert to the original configuration, you can use the Import-AipServiceTemplate cmdlet to restore the template. For more information about protection templates, including how to configure them in the Azure portal, see Configuring and managing templates for Azure Information Protection. Using the Azure Information Protection unified labeling client? The Azure Information Protection unified labeling client uses protection templates indirectly. If you have the unified labeling client, we recommend that you use label-based cmdlets instead of modifying your protection templates directly. For more information, see Create and publish sensitivity labels in the Microsoft 365 documentation.
Published Date : dimanche 17 janvier 2021

Add-AipServiceTemplate (AIPService)

https://docs.microsoft.com/en-us/powershell/module/aipservice/add-aipservicetemplate The Add-AipServiceTemplate cmdlet creates a protection template for Azure Information Protection with the specified name, description, and policy, and sets the status of the template to archived or published. The same configuration actions can also be done in the Azure portal. Important Before you use this cmdlet, you must first create a rights definition object that specifies the rights that you want to grant and to whom, by using the New-AipServiceRightsDefinition cmdlet. You can store a maximum of 500 custom templates (published or archived) in Azure. If you can't add new templates because you have reached this limit as a result of keeping many archived templates, consider exporting them to save the information locally and then removing these templates in Azure. For more information about protection templates, including how to configure them in the Azure portal, see Configuring and managing templates for Azure Information Protection. Using the Azure Information Protection unified labeling client? The Azure Information Protection unified labeling client uses protection templates indirectly. If you have the unified labeling client, we recommend that you use label-based cmdlets instead of modifying your protection templates directly. For more information, see Create and publish sensitivity labels in the Microsoft 365 documentation.
Published Date : dimanche 17 janvier 2021

Add-AIPScannerRepository (AzureInformationProtection)

https://docs.microsoft.com/en-us/powershell/module/azureinformationprotection/add-aipscannerrepository Adds a repository for your content scan job to scan. For more information about content scan jobs, see the Azure Information Protection on-premises scanner documentation. Note If you are using the AIP classic client, this cmdlet is deprecated. Instead, use the Azure portal to configure the scanner. To provide a unified and streamlined customer experience, the Azure Information Protection classic client and Label Management in the Azure Portal are being deprecated as of March 31, 2021. This time-frame allows all current Azure Information Protection customers to transition to our unified labeling solution using the Microsoft Information Protection Unified Labeling platform. Learn more in the official deprecation notice.
Published Date : dimanche 17 janvier 2021

Set-AIPScannerRepository (AzureInformationProtection)

https://docs.microsoft.com/en-us/powershell/module/azureinformationprotection/set-aipscannerrepository Updates the details for an existing repository defined in your content scan job. For more information about content scan jobs, see the Azure Information Protection on-premises scanner documentation. Note If you are using the AIP classic client, this cmdlet is deprecated. Instead, use the Azure portal to configure the scanner. To provide a unified and streamlined customer experience, the Azure Information Protection classic client and Label Management in the Azure Portal are being deprecated as of March 31, 2021. This time-frame allows all current Azure Information Protection customers to transition to our unified labeling solution using the Microsoft Information Protection Unified Labeling platform. Learn more in the official deprecation notice.
Published Date : dimanche 17 janvier 2021

Get-AipServiceDocumentLog (AIPService)

https://docs.microsoft.com/en-us/powershell/module/aipservice/get-aipservicedocumentlog The Get-AIPServiceDocumentLog cmdlet runs a query to return protection information about tracked documents. Information returned includes: The document content ID, with the document name if available. The Rights Management owner and Rights Management issuer. The users and groups that were granted access. The protection template ID or specific usage rights that protect the document. Any expiry, offline access, or revocation setting. You can specify a start time and stop time of entries to include. The output is returned as a list of PowerShell objects in the PowerShell console. For more information, see Rights Management owners and IRights Management issuers. Unified labeling client When used with the unified labeling client, the query is based on the document name, the owner email, or both. You must specify at least one of the following parameters: ContentName Owner Tip If you use the ContentName parameter, we recommend that you also use the FromTime and ToTime parameters to filter your content to a specific time period. Classic client When used with the classic client, this cmdlet returns protection information about the tracked documents for a specified user if that user protected documents (the Rights Management issuer) or was the Rights Management owner for documents, or protected documents were configured to grant access directly to the user. You can alternatively use the document tracking site to get the protection information about the tracked documents. For more information, see the Tracking and revoking documents for users section in the Azure Information Protection client admin guide.
Published Date : dimanche 17 janvier 2021

Clear-AipServiceDocumentRevoked (AIPService)

https://docs.microsoft.com/en-us/powershell/module/aipservice/clear-aipservicedocumentrevoked The Clear-AipServiceDocumentRevoked cmdlet clears the document's revoke status, and un-revokes a specified protected document, based on the document's contentID and Rights Management issuer. For example, use this cmdlet if you have accidentally revoked access to the specified document, and want to now grant access again.
Published Date : dimanche 17 janvier 2021

Set-MIPNetworkDiscovery (AzureInformationProtection)

https://docs.microsoft.com/en-us/powershell/module/azureinformationprotection/set-mipnetworkdiscovery The Set-MIPNetworkDiscovery cmdlet updates installation settings for the Network Discovery service. The Network Discovery service enables AIP administrators to scan a specified IP address or range for possibly risky repositories, using a network scan job. Use network scan job results to identify additional repositories in your network to further scan using a content scan job. For more information, see Create a network scan job.
Published Date : dimanche 17 janvier 2021

Set-AIPScannerContentScanJob (AzureInformationProtection)

https://docs.microsoft.com/en-us/powershell/module/azureinformationprotection/set-aipscannercontentscanjob Defines the configuration for your content scan job, which scans the content in the defined repositories, according to the settings defined. For more information about content scan jobs, see the Azure Information Protection on-premises scanner documentation.
Published Date : dimanche 17 janvier 2021

Créer des utilisateurs et des groupes Azure dans Azure Active Directory - Learn

https://docs.microsoft.com/fr-fr/learn/modules/create-users-and-groups-in-azure-active-directory/ Découvrez comment créer des utilisateurs et des groupes Azure dans Azure Active Directory.
Published Date : vendredi 25 octobre 2019

Gérer les secrets dans vos applications serveur avec Azure Key Vault - Learn

https://docs.microsoft.com/fr-fr/learn/modules/manage-secrets-with-azure-key-vault/ Découvrez comment créer un coffre Azure Key Vault pour stocker les valeurs de secret et comment activer un accès sécurisé au coffre.
Published Date : lundi 24 septembre 2018

Améliorer la disponibilité de vos services et la localité des données avec Azure Traffic Manager - Learn

https://docs.microsoft.com/fr-fr/learn/modules/distribute-load-with-traffic-manager/ Découvrez comment Azure Traffic Manager fournit un équilibrage de charge DNS pour votre application afin d’améliorer les performances et la disponibilité de votre application.
Published Date : lundi 15 avril 2019

Prise en main de la conformité des communications - Microsoft 365 Compliance

https://docs.microsoft.com/fr-fr/microsoft-365/compliance/communication-compliance-configure Configurez les stratégies de conformité des communications pour configurer les communications des utilisateurs à des fins de révision.
Published Date : dimanche 17 janvier 2021

Référence de la fonctionnalité de conformité des communications - Microsoft 365 Compliance

https://docs.microsoft.com/fr-fr/microsoft-365/compliance/communication-compliance-feature-reference Référence de la fonctionnalité de conformité de la communication dans Microsoft 365. Découvrez les détails et les spécifications de chacun des composants fonctionnels.
Published Date : dimanche 17 janvier 2021

Trouver votre ID de client Microsoft 365 - OneDrive

https://docs.microsoft.com/fr-fr/onedrive/find-your-office-365-tenant-id Découvrez comment trouver l’ID de client Microsoft 365.
Published Date : dimanche 17 janvier 2021

Configurer les comptes d’utilisateur en mode silencieux - OneDrive

https://docs.microsoft.com/fr-fr/onedrive/use-silent-account-configuration Découvrez comment les administrateurs informatiques peuvent activer la configuration de compte silencieux lors du déploiement de l’application de synchronisation OneDrive dans une entreprise.
Published Date : dimanche 17 janvier 2021

Rétention et suppression de OneDrive - OneDrive

https://docs.microsoft.com/fr-fr/onedrive/retention-and-deletion Découvrez ce qui se passe sur le OneDrive d’un utilisateur lorsque le compte Office 365 de l’organisation est supprimé.
Published Date : dimanche 17 janvier 2021

Activer la prise en charge de l’accès conditionnel dans l’application de synchronisation OneDrive - OneDrive

https://docs.microsoft.com/fr-fr/onedrive/enable-conditional-access Dans cet article, vous allez apprendre à activer l’accès conditionnel dans la nouvelle application de synchronisation OneDrive.
Published Date : dimanche 17 janvier 2021

Fonctionnement de la synchronisation - OneDrive

https://docs.microsoft.com/fr-fr/onedrive/sync-process Découvrez le fonctionnement de l’application de synchronisation OneDrive. Comprendre le flux d’informations entre les applications, la façon dont les technologies fonctionnent ensemble, & la manière dont les données sont sécurisées.
Published Date : dimanche 17 janvier 2021

Guide Ondrive pour entreprises - OneDrive

https://docs.microsoft.com/fr-fr/onedrive/plan-onedrive-enterprise Cet article est un guide pour les entreprises sur l’utilisation de OneDrive. Découvrez les fonctionnalités, la planification, la configuration, le déploiement et la gestion de OneDrive.
Published Date : dimanche 17 janvier 2021

Synchronisation B2B - OneDrive

https://docs.microsoft.com/fr-fr/onedrive/b2b-sync Découvrez comment l’application de synchronisation OneDrive permet aux utilisateurs de synchroniser les dossiers partagés par les utilisateurs d’autres organisations.
Published Date : dimanche 17 janvier 2021

Impact des modifications UPN sur OneDrive - OneDrive

https://docs.microsoft.com/fr-fr/onedrive/upn-changes Dans cet article, vous découvrirez comment la modification d’un nom d’utilisateur principal (UPN) affecte l’URL OneDrive et les fonctionnalités OneDrive.
Published Date : dimanche 17 janvier 2021

Déployer les applications OneDrive à l'aide de Microsoft Endpoint Configuration Manager - OneDrive

https://docs.microsoft.com/fr-fr/onedrive/deploy-on-windows Dans cet article, vous allez apprendre à déployer des applications OneDrive à l’aide du gestionnaire de configuration de point de terminaison Microsoft.
Published Date : dimanche 17 janvier 2021

Utiliser une stratégie de groupe pour contrôler les paramètres de synchronisation OneDrive - OneDrive

https://docs.microsoft.com/fr-fr/onedrive/use-group-policy Vous découvrirez dans cet article les objets de stratégie de groupe OneDrive (GPO) et comment configurer l’application de synchronisation OneDrive en utilisant une stratégie de groupe.
Published Date : dimanche 17 janvier 2021

Create and manage Private Azure Marketplace in Azure portal - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/create-manage-private-azure-marketplace Learn about creating and managing Private Azure Marketplace (preview) in the Azure portal. Private Azure Marketplace (preview) lets administrators govern which third-party solutions their users can use.
Published Date : mardi 22 décembre 2020

Azure Marketplace overview - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/azure-marketplace-overview Learn about the Azure Marketplace online store and how you can find and try out software and solutions.
Published Date : vendredi 20 novembre 2020

Purchasing software and solutions from Azure Marketplace - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/azure-purchasing-invoicing Learn about tools that simplify and streamline software purchases and management in Azure Marketplace.
Published Date : vendredi 20 novembre 2020

Quickstart: Manage a Private Azure Marketplace using PowerShell - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/manage-private-azure-marketplace-powershell This quickstart shows you how to manage offers in a Private Azure Marketplace using Azure PowerShell.
Published Date : mardi 24 novembre 2020

Azure Marketplace partner integrations - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/partner-integrations Learn about Azure Marketplace solutions that integrate with your Azure environment, and get link to deployment guides from Microsoft partners.
Published Date : lundi 16 novembre 2020

Refund policies for Microsoft AppSource and Azure Marketplace - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/refund-policies Learn what are the refund policies for products sold on Microsoft AppSource and Azure Marketplace
Published Date : vendredi 20 novembre 2020

Billing and invoicing for Azure Marketplace customers - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/billing-invoicing This article describes common questions about billing and invoicing for Azure Marketplace customers.
Published Date : vendredi 20 novembre 2020

Private offers in Azure Marketplace - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/private-offers Learn about private offers in Azure Marketplace.
Published Date : vendredi 20 novembre 2020

Legal contracts in Azure Marketplace - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/legal-contracts Learn about legal contracts in Azure Marketplace.
Published Date : vendredi 20 novembre 2020

Transfer eligibility – Guidelines for transferring a subscription between billing accounts, Azure Marketplace - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/transfer-eligibility Guidelines for commercial checks prior to transferring a subscription between billing accounts in the Azure portal.
Published Date : vendredi 20 novembre 2020

Welcome to Microsoft marketplace customer documentation - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/ Learn how to find and purchase solutions, applications, and services from Microsoft partners on our online stores.
Published Date : mardi 17 novembre 2020

Microsoft AppSource overview - Microsoft marketplace

https://docs.microsoft.com/en-us/marketplace/appsource-overview Learn about the Microsoft AppSource online store and how you can find and extensive catalog of software and solutions.
Published Date : vendredi 20 novembre 2020

Utiliser des étiquettes de confidentialité avec Microsoft Teams, les Groupes Microsoft 365 et les sites SharePoint - Microsoft 365 Compliance

https://docs.microsoft.com/fr-fr/microsoft-365/compliance/sensitivity-labels-teams-groups-sites Utilisez les étiquettes de confidentialité pour protéger le contenu des sites SharePoint et Microsoft Teams, ainsi que des Groupes Microsoft 365.
Published Date : dimanche 17 janvier 2021

Installer .NET sur Windows

https://docs.microsoft.com/fr-fr/dotnet/core/install/windows Découvrez les versions de Windows sur lesquelles vous pouvez installer .NET.
Published Date : mercredi 6 janvier 2021

Liste de vérification de la planification de la migration d’application - Microsoft Graph

https://docs.microsoft.com/fr-fr/graph/migrate-azure-ad-graph-planning-checklist Liste de vérification pour la migration de vos applications à partir d’Azure AD Graph vers Microsoft Graph
Published Date : samedi 16 janvier 2021

Nouveautés dans Microsoft Graph - Microsoft Graph

https://docs.microsoft.com/fr-fr/graph/whats-new-overview Nouveautés actuelles dans Microsoft Graph
Published Date : samedi 16 janvier 2021

Personnalisation de la confidentialité des informations sur les éléments dans Microsoft Graph - Microsoft Graph

https://docs.microsoft.com/fr-fr/graph/insights-customize-item-insights-privacy
Published Date : samedi 16 janvier 2021

Configuration des notifications pour les modifications des données utilisateur - Microsoft Graph

https://docs.microsoft.com/fr-fr/graph/webhooks L’API Microsoft Graph utilise un mécanisme de webhook pour remettre des notifications de modifications aux clients. Un client est un service web qui configure sa propre URL pour recevoir des notifications de modifications. Les applications clientes utilisent des notifications de modifications pour mettre à jour leur état en cas de modifications.
Published Date : samedi 16 janvier 2021

Microsoft Azure avantages dans les abonnements Visual Studio

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vs-azure Découvrez comment activer l’offre Azure DevTest pour les crédits individuels inclus dans votre abonnement Visual Studio.
Published Date : mercredi 28 octobre 2020

Avantages Azure DevOps pour les abonnés Visual Studio

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vs-azure-devops Découvrez comment vous pouvez utiliser Azure DevOps en tant qu’abonné Visual Studio.
Published Date : mercredi 22 juillet 2020

Crédit mensuel Azure

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/faq/subscriber/azure/ Liste des questions fréquentes sur le crédit mensuel Azure.
Published Date : vendredi 3 avril 2020

Identités pour les abonnés Visual Studio

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vs-alternate-identity Comment ajouter une identité secondaire à votre abonnement Visual Studio pour l’utiliser avec Azure DevOps et Azure
Published Date : lundi 21 octobre 2019

Offre Azure Accord Entreprise DevTest

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/azure-ea-devtest Découvrez comment tirer parti des tarifs spéciaux d’Azure DevTest disponibles pour les clients disposant d’un contrat entreprise
Published Date : lundi 26 octobre 2020

Avantage Azure PAYG dans les abonnements Visual Studio

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vs-azure-payg Découvrez comment créer votre compte Azure avec paiement à l’utilisation.
Published Date : mercredi 21 octobre 2020

Avantage du Support de la communauté Azure dans Visual Studio Subscription

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vs-azure-community Découvrez l’avantage du Support de la communauté Azure inclus dans certains abonnements Visual Studio.
Published Date : mercredi 2 décembre 2020

Avantage chat concierge dans un abonnement Visual Studio

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vs-concierge-chat Découvrez l’avantage Concierge Chat inclus dans les abonnements Visual Studio.
Published Date : mercredi 2 décembre 2020

Abonnements Visual Studio

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/ Les abonnements Visual Studio sont un ensemble complet de ressources qui vous permettent de créer, déployer et gérer des applications sur vos plateformes et appareils préférés, notamment Windows, iOS, Android et Linux. Les avantages des abonnements sont notamment l’accès aux outils de développement, à des services cloud et à des logiciels, à de la formation et à du support pour vos besoins en développement et en tests.
Published Date : vendredi 9 octobre 2020

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/assign-license-bulk Découvrez comment les administrateurs peuvent attribuer des licences à plusieurs abonnés à l’aide de la fonctionnalité d’ajout en bloc ou de groupes de Microsoft Azure Active Directory
Published Date : jeudi 22 octobre 2020

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vs-developer-community En savoir plus sur l’avantage du support de la communauté des développeurs inclus dans les abonnements Visual Studio sélectionnés.
Published Date : mercredi 2 décembre 2020

Contactez votre administrateur d’abonnement sur le portail de l’abonné

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/contact-my-admin Découvrez comment contacter votre administrateur d’abonnement pour obtenir de l’aide concernant des questions ou des problèmes.
Published Date : mardi 8 septembre 2020

Utilisation du portail des abonnés dans les abonnements Visual Studio

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/using-the-subscriber-portal Découvrez plus d’informations sur la gamme complète des avantages disponibles sur le portail des abonnements Visual Studio
Published Date : mercredi 28 octobre 2020

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/whats-new-in-subscriptions Découvrez les fonctionnalités nouvelles et mises à jour que vous pouvez utiliser pour gérer les abonnements Visual Studio.
Published Date : mercredi 1 avril 2020

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vs-linkedin-learning Découvrez l’avantage LinkedIn Learning, qui est lié à un abonnement LinkedIn Premium inclus dans certains abonnements Visual Studio.
Published Date : mercredi 2 décembre 2020

Supprimer les affectations d’abonnements Visual Studio dans le portail d’administration des abonnements

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/delete-license Découvrez comment les administrateurs peuvent supprimer des affectations d’abonnements dans le portail d’administration des abonnements Visual Studio
Published Date : lundi 26 octobre 2020

Avantage du compte de développeur Windows dans les abonnements Visual Studio

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vs-windows-dev Découvrez le compte de développeur Windows inclus dans votre abonnement Visual Studio.
Published Date : mercredi 2 décembre 2020

Achat d’abonnements cloud Visual Studio pour les fournisseurs de solutions Cloud

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vscloud-csp Informations destinées aux fournisseurs de solutions cloud concernant l’achat et la gestion d’abonnements cloud Visual Studio pour vos clients.
Published Date : mercredi 21 octobre 2020

Communauté technique Microsoft dans les abonnements Visual Studio

https://docs.microsoft.com/fr-fr/visualstudio/subscriptions/vs-microsoft-tech-community En savoir plus sur l’avantage du support Microsoft Tech Community Forum inclus dans les abonnements Visual Studio sélectionnés.
Published Date : mercredi 2 décembre 2020

Microsoft Docs - Articles les plus récents

Selected Feed: Azure